Split Lid B (notched)

The stainless steel container lid is cut in half, hinges are attached, and a part of it is cut off.

・Part of the lid is cut off to prevent it from interfering with the shaft of the agitator (Stirrer/Stirrer), so that it can be agitated with the lid on.
・Only half can be opened and closed without removing the lid.
・It is suitable for checking the inside during stirring and for inputting raw materials.
・The nozzle (fitting) on the lid of the image is an image of processing. The type, size, and position of the nozzle can be set as desired.
・Can be used without nozzle processing, without hinges (split lid), and without cutouts.
・If you want to open and close only a part of the lid while fixing it, instead of opening and closing half of the lid, refer to the split lid C. If you do not use a stirrer, refer to the split lid A without a notch.
・If you do not need to open or close the lid, refer to the drilled lid C with cutout only.