Split Lid C (Opening and closing lid)

Optional processing to make an opening and closing part (Opening and closing lid) on a part of the lid for stainless steel container.

・You can open and close only one part of the lid, not half.
・Suitable for internal checking and input of raw materials.
・The image is an image of processing. Machining such as adding nozzles (fitting) is also possible.
・When using an agitator (Stirrer/Stirrer), it is possible to cut off a part of the shaft to prevent it from interfering with the shaft.
・If you want to open and close half of the lid, refer to Split Lid A. If you want to open and close half of the lid and use a stirrer, refer to Split Lid B.