Rubber stopper receiver container
Features
Pharmaceutical manufacturer delivery
○ It is a custom-made case of stainless steel container used for storage and transport of sterile rubber stopper.
Hopper type container is a lever-banded closed container, manufactured with SUS316L and the inner surface is electropolished.
At the top of the container, the diaphragm valve and the lower part are installed at the bottom.
Under the container, receiving containers are installed.
The container and the receptacle's edge winding section is karl seal (full welding) and excellent in cleaning.
The container can be removed from the mount and installs a dedicated bracket to lift it with a lifter.
A receiving board (guide) is attached to the mounting side so that the container can be installed smoothly.
The mount is made with a square pipe and installs a caster to attach a caster and transport smoothly.
Product Specifications
Dimension container: inner diameter φ520 mm × height about 660 mm
Receptor: Base diameter 387 mm × height 95 mm
Capacity 80L
Material Container: SUS316L Mountain: SUS304
Finishing container: inner and outer surfaces # 320 Buff after polishing inner surface electrolytic polishing
Mountain: outer surface # 320 buff polishing
Parts 200A container type butterfly valve
15A diaphragm valve
Documents Millsheet, Electrolytic Polishing Certificate, Appearance Inspection Certificate
Management number 1J001247