Dust collection hooded hopper for placement of powder
Features
Chemical manufacturer delivery
○ Case of stainless steel hopper used to measure powder.
Used by combining hopper with hopper with dust collection hooded hopper leg [HTD-L], a combination, a lifter, and receiver.
Hood can connect a dust collector, and can be input while reducing the scattering of flour rising.
The hood is screwed and can be removable.
At the top of the hood, a seat plate is installed to install a weight display panel of a scale.
There is a work table in front of the input port, and a bag with powder can be placed.
The lower part of the hopper makes a space where a lifter, a scale, and a receiver enter container.
Place the receiving container on the lifter with a scale and raise it to the outlet of the hopper.
Hopper dust into pieces slightly.
In the weight display panel, adjust the input amount while checking the weight of the powder contained in the receiver.
When we finish the weighing, lower the lifter and retrieve the receiver.
Product Specifications
Dimension inner diameter φ470 mm × height H1410 mm
Material SUS304
Surface treatment inside and out / outside surface # 320 buff polishing
Other receiving containers (inner diameter φ300 mm)
Scale, Hand lifter (low floor type)
Management number 1W005661
Details & Notes
As a product that is based on this order maid case, there is a “hopper leg with dust collection hood (HTD-L-47)”.
There is also a stainless steel container for powder recovery.View Product DetailsView Product DetailsCustom-made case of stainless steel products adopted by customers who handle powderView Product DetailsView Product DetailsView Product DetailsIf you are concerned about the case of other companies in the same industry
We adopt a stainless steel container of the Nitto Metal Industries in various industry manufacturers.
We have published some of the custom-made cases so far by industry.
Search for examples of adoption by industry
Technology column for powder flowability
We introduce how to influence the factors that influence the fluidity of the powder and the method of improving the fluidity that can be proposed when manufacturing a hopper.
What is the “liquidity” that you want to know if you handle powder hopper? I see