Bernoulli-Flow Agitating Units [KU Series]
These turnkey units combine a Bernoulli-flow agitator, a stainless tank, and an optimized discharge valve.
Four body / outlet variations are available to match the viscosity, discharge speed, and cleaning requirements of your process.
Unit Line-up at a Glance
KTT-L Series (Side Outlet + LPS Valve)
DTK Series (Bottom Outlet + Ball Valve)
DTHB Series (Tank-Bottom Ball Valve)
DTM Series (Tank-Bottom Diaphragm Valve)
Unit Line-up at a Glance
| Model | Outlet Direction | Valve Type | Main Feature |
|---|---|---|---|
| KTT-L | Side (≈3° slope) | LPS Sanitary Butterfly | Smooth horizontal discharge; ideal where piping clearance is limited. |
| DTK | Bottom-center | 2-way Ball | Cost-effective, full-bore outlet for general liquids. |
| DTHB | Tank-bottom | Tank-Bottom Ball | Quick full-open / close with minimal dead space. |
| DTM | Tank-bottom | Tank-Bottom Diaphragm | Ultra-low hold-up & CIP-friendly—best for high hygiene duties. |
KTT-L Series — Side-Outlet with LPS Valve
The single-slope bottom (≈3°) drains product to a horizontal LPS valve, reducing residual liquid and enabling easy inline connection.
DTK Series — Bottom-Outlet Ball Valve
Hemispherical bottom with a sanitary ball valve. Good for standard liquid blending and transfer.
DTHB Series — Tank-Bottom Ball Valve
Equipped with a flush-mount tank-bottom ball valve that opens fully in one motion, minimizing dead space.
DTM Series — Tank-Bottom Diaphragm Valve
Features a flush diaphragm valve that leaves virtually no liquid hold-up—ideal for high-purity or sticky formulations.
Bernoulli Agitating Unit [DTM]
The feature is that there is little remaining liquid and it is also good for cleaning.